Materials Dealing with Electrical power UNIT 1
This power unit is developed for the fork lift market, consisting of very productive gear pump, DC motor, guide increase and decrease valve, tank, ect. The up and down motion are managed by the lever from the guide release valve, that’s outfitted with an electric switch to activate the motor. The lowing speed is managed through the stress compensated movement control valve.
one. The duty of this energy unit is S3, i.e. 30 seconds on and 270 senconds off.
2. Clean each of the hydraulic elements concerned prior to installation of the power unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst, which should also be clean and free of charge of impurities, N46 hydraulic oil is advised .
four. Oil altering is needed right after the original a hundred operation hrs, afterwards as soon as every single 3000 hrs.
5. The electrical power unit proven is created to be mounted horizontally.
Material Handling Power UNIT two
This electrical power unit characteristics power up gravity down circuit. Activate the get started solenoid to start the motor to lift the machine. The lowing movement is activated through the solenoid valve with the lowering speed managed by the strain compensated movement control valve. Goods of this series might be widely utilized in the industry of logistic units which include fork lift, mini lift table, and so on.
1. The duty of this power unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean each of the hydraulic parts concerned prior to mounting the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst,which should really also be clean and totally free of impurities, N46 hydraulic oil is advised .
4. Oil shifting is required just after the first one hundred operation hours,afterwards as soon as every single 3000 hrs.
five. The power unit ought to be mounted horizontally.