Globally conventional chains complying with JIS and ANSI

The 14 sizes of typical roller chains can be found ranging from 25 to 240 including these in conformity with ANSI (American Nationwide Conventional Institute), and ISO (International Organization for Standardization).
The chains not only meet the requirements for that Y2 Series three-Phase asynchronous Motors minimum tensile power prescribed by ANSI and ISO, however they also supply the top class high-quality within the world together with a high fatigue strength
Suitable uses
?Standard use for driving and lifting products.
?Driving transfer units along with other tools. For multilevel parking.
Variety of chains
For choice of a chain, see the tables of “Max. Horsepower Ratings” for typical roller chains and “Designing of Chain Transmission”. Nevertheless, only for any special case of low speed and significantly less shock, “Low-speed selection” technique can also be referred to.
Common roller chains up to 5 strands can be found. The common system for connecting pins and plates is rivet type (RP).
The cotter type (CP) is accessible for common chains and HK chains of 80 or more substantial.
The regular roller chains is usually engaged with normal sprockets with the corresponding nominal numbers. For sprockets, refer towards the table of “Dimensions” for each dimension of chain.
Connecting links and offset back links
For connecting hyperlinks and offset hyperlinks, refer towards the table of “Dimensions” for each size of chain.
The connecting links are frequently R or C connecting links during which the pins are clearance-fitted with the connecting plate. Considering the fact that clearance-fitted hyperlinks are inferior towards the base chain in Max. allowable tension as within the situation of one-pitch offset hyperlinks (OJ), “Low-speed selection” can’t be referred to. Because the Max. kilowatt ratings are determined contemplating the power of connecting hyperlinks and OJ, the clearance-fitted connecting hyperlinks and OJ might be applied in the event the chains are chosen according to your “General selection”. When a increased Max. allowable tension is required for the connecting hyperlink, use the interference-fitted connecting link (H connecting hyperlink) of a HI-PWR-S chain, and inside the case of offset backlinks, use 2POJ.


Recent Posts

worm gearboxes

As one of leading worm gearboxes manufacturers, suppliers and exporters of mechanical products, We offer worm gearboxes and many other products.

Please contact us for details.


Manufacturer supplier exporter of worm gearboxes