Consisting of the pressure balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this power unit is designed to operate material handling products. The decreasing motion is achived from the solenoid valve together with the reducing velocity controlled by an adjustable needle valve. The left and right functions are outfitted using a dual pilot operated test valve and cross-over relief valves.
Remark: Please seek advice from our revenue engineer for the distinctive pump displacement, motor energy or tank capacity.
1. This energy unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
2. Clean the many hydraulic elements concerned before set up of the electrical power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst, which should also be clean and absolutely free of impurities.N46 hydraulic oil is proposed.
4. This power unit should be mounted horizontal.
five. Check the oil level within the tank immediately after the first start off with the energy unit.
six. Oil transforming is required soon after the first a hundred operation hours, afterwards the moment each and every 3000 hrs.
SNOW PLOW Energy UNIT